8 pin OCTAL PLUG

[S. M. Whitehouse]

I found a couple at an electronics store that caters to TV service types and
has been in business a long time. They still had them in stock!
Stew KE4YH
Dunedin, Florida

-----Original Message-----
From: Ed Kowalski <edrk at IX.NETCOM.COM>
To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
Date: Monday, November 22, 1999 11:35 PM
Subject: Re: 8 pin OCTAL PLUG


>These were very common items, made by Amphenol. Try the hamfest parts
>bins.  Ed  K3PRE
>
>Mark V. Johnson VE3DJU wrote:
>>
>> Hello all:
>>
>> I'm looking for an 8 pin Octal plug and cover that is used on the Heath
>> HG-10 VFO. This plug connects to an HW-16 or DX-60 to provide the power.
If
>> I recall correctly, this same plug and cover was used on the HP-23 pwr
>> supplies as well. Anyone help me as to where I might find one??
>>
>> I know I could break up an 8 pin OCTAL tube and use the base, but a
proper
>> plug and cover is the preferred solution.
>> TNX
>>
>> Sponsored by the City of Tempe
>>
>> Listserver Submissions:  heath at listserv.tempe.gov
>> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
>> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>
>Sponsored by the City of Tempe
>
>Listserver Submissions:  heath at listserv.tempe.gov
>Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
>Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"