Heathkit HO-10 Monitor Scope

[Larry Knapp]

To all active "Heathen's":

I have a very good condition HO-10 that does work to a degree....the trace is
in the middle of the crt and then is horizontal out to the right of the face.
In other words nothing appears on the left half of the scope.  All other
functions seem to work ok...vertical (gain & position), intensity, focus, tx
attenuator, horizontal gain.....etc....except for this.  I have replaced all
tubes in the HO-10, except for the crt tube....in fact all the tubes in it were
original Daystrom tubes (pretty cool I thought).  The horizontal position does
not move the trace to the left at all, only to the right.  All original
components appear to be there.  I have gotten all the dust out of the
connections and cleaned it up very good inside.  Any suggestions on what to
look for from those who have probably done this many many times?  73's Larry


=====
May your days be full of sunshine and good thoughts fill your head.
From: Larry Knapp, KC8JX, St. Joseph, Mi  49085
  Best 73's
__________________________________________________
Do You Yahoo!?
Thousands of Stores.  Millions of Products.  All in one place.
Yahoo! Shopping: http://shopping.yahoo.com

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"