SB-220 or 221 meter needed

[Paul W. Hansen]

    I just acquired a very nice SB-221 that has a blown multi-meter. That's
the one for relative RF, grid current and plate voltage. It looks like a
200ua movement as does the plate current meter. I have successfully removed
the scale without damaging it so if anyone has either meter with an intact
movement, it could be financially rewarding and I would be most grateful.
Information about where to locate one would also work nicely.
    The amp looks very close to new and appears to totally operational
except for that one meter. Plate voltage is on the tubes and the bleeder and
meter resistor are intact in the HV supply. I don't know what blew the meter
but it would be a shame to not restore this amplifier.

73, Paul, W6XA

pwhansen at bellsouth.net

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"