SB-610

[Joe]

Yes you will need an IF output on the radio using the extra RCA's on the
back of the SB-102
Tap off the (high side) last IF transformer with a 1-10 Pf disc and that
goes to the vertical input
as sated on page 33 of the manual.
Watch for loading and detuning effects, use low capacity shielded cable and
the smallest disc cap possible.
Heath says use *ONLY* RG-62 regarding the taps and connecting cable's
good luck

-----Original Message-----
From: Mark Adams <madams0 at US.IBM.COM>
To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
Date: Thursday, October 14, 1999 12:37 AM
Subject: SB-610


>Hello to all,
>
>I have a SB-610 and would like to use it to also monitor receive but I do
not
>have the manual for the SB-610.
>
>I will be hooking it up to a SB-102.
>
>Are there modifications that need to be done to the SB-102(IF) or to the
SB-610.
>
>Thanks in advance for the help.
>
>Stormy weather here in Columbus, Oh
>
>Sponsored by the City of Tempe
>
>Listserver Submissions:  heath at listserv.tempe.gov
>Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
>Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"