GR78 parts

[Greg Miller]

Vern,
    My GR-78 had a dead battery also...  I chose a Radio Shack 8AA battery
holder (RS# 270-407) and a 9 volt snap.  I used eight Radio Shack AA NiCads
in there with a wire soldered to the other end of the holder to get the 4.5V
tap.  It's a hair longer than it should be, but with a little sanding on the
ends it'll fit right where the old one was.  It works great with the
built-in charger!!
I think it cost me around $15 for everything...

Hope this helps,
- Greg

----- Original Message -----
From: "Vern Chadwell" <vchadwel at SPRYNET.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, August 08, 2000 12:37 AM
Subject: GR78 parts


Hi fellow Heathniks,

I'm looking for the following for my GR78.
Lever Knob         462-240
Speaker             401-135
Speaker Grille    209-55
Battery              418-23   (GE 42B905JD14-2)
I'm working with a battery supplier to make a replacement but if someone has
already invented that wheel, I'm interested.

Thanks,
Vern

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"