Re Ed Lambert's request for pinout on HRA-10-1

[Ed Lambert" "K1ZOK]

Thanks...

With these connections, it does match the pinout identified on the HW-12
schematic.  Should work!

Ed
On Sat, 19 Aug 2000 15:04:26 -0400 Keith Harvey <kharvey at AMTELECOM.CA>
writes:
> The HRA-10-1 pinout is: Pin1- calibrator output to receiver ant.
> input, Pin2- 125 to 150 VDC B+, Pin3 6.3VAC filament, Pin8 Gnd
>
> Hope this helps.
>
> Keith VA3KRV
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"