Needed 6" x 9" speaker for SB-600

[J. M. Blackmon]

This information appeared on this reflector some time ago.  Perhaps it needs to be posted again at this time:

Subject:
             Re Speaker Reconing
        Date:
             Mon, 30 Oct 2000 21:33:32 -0600
       From:
             Ken Ketner <ketner at arisbeassociates.com>
 Organization:
             Arisbe Associates
         To:
             HEATH at LISTSERV.TEMPE.GOV
  References:
             1




For Speaker Reconing, on several occasions I have successfully used
Jackson Speaker Service. Ron McGee, 217 Crestbrook Dr., Jackson, MI
49203, home fone 517 789 8412.
--

Ken Ketner

Doug Shields wrote:

> Hello all,
>     I have an SB-600 that needs a new speaker.  I purchased a generic 6" x 9" speaker from Radio Shack but it does not fit without some metal working which I would prefer not to do.  Does anyone have a good Heathkit # 401-108 speaker that I could buy?  Alternately, does anyone know of a replacement speaker that will fit an unmodified SB-600 enclosure?  Thanks again.
>
> Doug  W4DAS
> dcb at ecqual.net
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"