coax rg82u and rg174u

[CHRISTOPHER W. (Chris) BOONE]

You need RG62 not 82.....the 62 is 93 ohm low capacitance
coax....lots of IBM 3270 mainframe systems used it...check with
companies that may have used such....I know my former company
did (because I got to install the cables and hook them up!)
I think there is some still there (we went PC based years ago
before I left)...I will look next time I am there (still have
a couple of ham rptrs on the microwave tower sites there)
in case you dont find any before hand...
Instead of 174, use RG58 instead...easier to solder with..
(unless you are working on the inside of the units...the 174 is
more flexible and smaller...but to connect the twins together,
dont bother with 174)

Chris
WB5ITT

"T.L.Tallman" wrote:
>
> need about 2 feet each of rg82u and rg174u to interface my sb301 sb401 any leads thank you terry N0WJH

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"