HR-10 Circuitry

[Mark S Graalman]

  Hi All,


  I have a question, I hope its not a dumb one! I was casually looking
at the diagram tonight of the HR-10 receiver and I saw something I
never noticed before, The first I.F. stage is a 6BA6 and they have it
wired with G1 (control grid) as the screen and G2 (screen grid) as the
control grid. I looked at the under chassis pictorials and the actual
wiring
and it is not an error in the manual. Can anyone shed any light as to why
this
was done? Seems to me the physical placing of the grids would be the
supressor closest to the plate, then the screen, then the control grid
closest
to the cathode, and if that's the case this configuration would put the
screen
in between the acting control grid and the cathode! I REALLY hope this
ain't
a dumb question BUT............

Mark  WB8JKR

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"