Trouble Shooting Tips

Mike Shelton ke4lgx at YAHOO.COM
Sun Feb 27 23:28:44 EST 2000


I always start at the speaker and work back, and the
RF out back to the osc.
A good way to clean tube sockets is to use TARN-X and
pipe cleaners,they slide down in the connectors and
will make short order of corrosion, be sure to use
ELECTRO-WASH to remove that tarn-x residue.
Automotive SILICON SPRAY  lubs and protects from
moisture. and GC silicon grease does wonders on
detents
and slides.
And don't use metal type resistors in RF sections,
remember skin effect?and take the time to make a
breakout box to monitor all currents going to the
radio
from the power supply such as the hp series, it is a
big help.
and last wash all boards (foil side) with flux remover
so the foil landings won't eat away.
Mike ke4lgx

=====
Mike Shelton CET.
    KE4LGX
Amateur Radio Service
Ph/Fx 336-229-5671
http://www.angelfire.com/nc/totalelectronics
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"




More information about the Heath mailing list