WTB: HR-10 Output Transformer[via LSMTP - see www.lsoft.com]

[D Nance]

I've been working on an HR-10B and determined that the primary winding
on the audio output transformer is open.  I checked in hopes it was
burnt in two where the leads attached, but no such luck.

Does anyone have one they would be willing to part with?  Heath part
number is 51-84.  The secondary is tapped for both 8 and 500 ohm.

Also, it looks like the output transformer in the HW/SB 100/101/102
series may work.  Although it carries a different part number (51-123),
it has the same secondary arrangement as the transformer in the HR-10.
Can anyone confirm if this transformer will work?

Thanks,
David Nance - W4SSE
dmnance at roanoke.infi.net

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"