HW-32 20 Meter Transceiver

[Stu Lyon]

Hi Pat

Here goes . . . . .
Pin1 - -130 Volts
Pin 2 - Ground
Pin 3 - +250 Volts
Pin 4 - +800 Volts
Pin 5,8 - Power switch
Pin 6,7 - 12.6 VAC fils (Looks like Pin 6 should be ground side cuz all the
bypass caps connect to the pin 7 side.)

Hope this helps es 73,
Stu W6CUX.
----- Original Message -----
From: Pat Tocornal <Brookbank at AOL.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, June 22, 2000 5:00 PM
Subject: HW-32 20 Meter Transceiver


> Just acquired a hw-32 transceiver, but the pinout for the power supply is
an
> octal, my Hw-12A has an 11 pin connector for the HP23 power supply.
> Does anyone have the pin assignments for the 8 pin connector on the HW-32?
>
> Thanks in advance for any response.
>
> Patrick

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"