WANTED !

[John Hutchins]

Scarce as hen's teeth describes the 104 extender board.
Not having an extender I used molex pins and wire to fab one jumper for each pin.
I alternated red and black wires to minimize errors when plugging each jumper in.
Keep the length short to try not to introduce problems.
Its a little clumsy, but I've had succes with it.
Gud luck,
John

"M. Kassay" wrote:

> Hi Heath lovers...
>
> Im looking for the  EXTENDER BOARD for the SB-104....
>
> I know someone earlier on this reflector was going to make some, but I
> cant remember who it was....  If you know who you are, pls send me an
> Email. :)
>
> So, either new or used, I need one, so, if you can help me out, pls
> let me know.  Id really like to get this rig operational again.....
>
> Thanks agn
>
> 73 Mike
>
> --
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> Michael Kassay - VE3MKX - QRP
> Minesing, Ontario, CANADA
> mailto:Michael.Kassay at sympatico.ca
> mailto:ve3mkx at rac.ca
> Packet: VE3MKX @ VE3FJB .#con.on.can.na
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"