RE dx60

[Bob Meyer]

I have a DX60 thats works.
I am not shure of defference in A or B.
There is a few hams here with DX 60 series.

There ia a 1.1Mh bias choke to grid 1 of 6146B.
Looks like L2 taped coil that goes to wafer switch.

Well You could wind you own coil with #16 ga tined coper wire. you need 1 to look at to get # turns and taps and the dia.

The wafer switch may be hard to find.
If you can find who made the switch you may be 
able to get one.

It has been a long time sence I had mine apart.
If I rember L2 is small dia. coil on a tube.

If you have to ,find a scrap one from a old TV or radio .
all you need is the coil form the same size and remove 
old windings and put new on.

I had to do this on my heath kit scope.

hopefully someone here will have a old switch or a DX 60 for parts..

Robert Meyer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20000311/1760ee16/attachment.html>