DX60B info

[Gary Schafer]

Hello to all

I have a DX60B that has been kind of robbed of some parts that I am
trying to get going. Still looking for the driver plate coil and
switch.   But discovered another problem....

It seems that the power supply may be a little different in the B from
the plain DX60.
I have the schematic and manual on the plain DX60. On the output of the
power supply it shows a 30K center taped fixed resistor. Probably about
10 watts. The pictures in the manual show the resistor mounted on end on
the top side of the chassis and the wires going through a hole and
grommet to the bottom of the chassis.
Question is: the DX60B that I have is missing this resistor. There is no
hole to mount it and there is no hole for the wires to run through. Did
they use the same size resistor (value) and mount it underneath the
chassis, or was it a couple of 2 watt higher value resistors in the
DX60B ?

Thanks
Gary  K4FMX

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"