[HeathKit] DX60B power out?

[Mark S Graalman]

 You either got a hot DX-60, or a wattmeter that needs calibration <G>

My DX-60 provides the following output to 50 ohms:

80 meters 50 watts
40 meters 50 watts
20 meters 35 watts
15 meters 30 watts
10 meters 20 watts
 The final shouldn't be loaded to more than 150 ma plate current.
The final grid drive to no more than 2.5 ma

Mark  WB8JKR


On Mon, 20 Mar 2000 22:12:16 -0500 Gary Schafer <gschafer at mediaone.net>
writes:
> Hello Heath guys
>
> I am working on a DX60B. Worst built kit I have ever seen. Half of
> joints poor solder connections. Any how, can someone tell me how
> much
> power you should get out on 10 meters. 29 mhz.  I am getting about
> 30
> watts out. Looks like it is running the 90 watts in. 150 to 170 ma
> at
> 600 volts. Can't try it on other bands yet. Broken band switch. Is
> this
> all you will get out on 10 meters ? Seems like it should be close to
> 50
> to 55 watts ?
>
> Thanks
> Gary  K4FMX
>
>
>
> ---
> Submissions heathkit at qth.net

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"