CW Filter Confusion

[Larry Gauthier]

Larry,

We used two different numbering schemes within Heath: a catalog model number
(SBA-301-2: the second (-2) listed _A_ccessory for an SB-102) and then there
was the part numbering system for repair parts. In the case of the filters,
the product number and the part number were exactly identical, because there
were no other parts (well... a brief installation guide) that came with the
filter.

In fact, you could not "order" the replacement part 404-283; we made you buy
the "product".

-larry
wb8bgo
----- Original Message -----
From: "Larry Clark" <lclark at CSU.ORG>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Sunday, March 26, 2000 3:17 AM
Subject: CW Filter Confusion


> Hello,
>
> I'm looking for a 400 Hz CW filter for my SB-102.  The part numbers that
I'm
> encountering dont't look anything like the number in the 102 manual.  The
manual
> calls for an SBA-301-2, but the numbers I'm running across look more like
> 404-283 (the SSB filter p/n).  What's going on here?  Did Heath use two
seperate
> part numbering systems?  I'm thinking the SBA # must an accessory order
number
> and not the actual p/n.  Can someone educate me a bit?  Thanks!
>
> Larry, K0RS
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"