SB-104A SB644

[mike bryce]

terry...
the vfo in the remote is the same critter as in the 104a. only difference is
the interface board inside the external vfo


to get the display from the 104a into the 644 would be a major project. you
need the counter (A) board. it counts, adds and does other magic to the
various signals flowing inside the 104a. this counter board does most of the
magic required for the display board.

I suppose if one really knew what one was doing, you could design an
internal counter with all the required presets so the display would be
correct when reading only the remote vfo signal. WOuld be a project not for
the faint hearted!
--
Mike Bryce WB8VGE
SunLight Energy Systems
"Electricity at the speed of light"

> From: TERRY ENGLAND <w9cau at SOLTEC.NET>
> Reply-To: TERRY ENGLAND <w9cau at SOLTEC.NET>
> Date: Fri, 5 May 2000 18:24:57 -0700
> To: HEATH at LISTSERV.TEMPE.GOV
> Subject: SB-104A SB644
>
> Hello all, has anyone ever took a vfo and readout out of a sb-104a and
> installed it in the sb-644 vfo ? If so I would like to hear from you about
> this mode.                              Tnx Terry
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name'
> 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"