Two Questions - HP-23A and HW-101

[Steve and Anne Ray]

First check that you have the switch on the power supply set for the HW-101.
The lower voltage setting is for a HW-12 series rig.  This will cause the vr
tube to go out.  Next check the resistor in series with the VR tube.

73,

Steve Ray K4JPN ex K1VKW HW-101, HW-8, OHR-100A, SWL 30-40 and NC 38S
HeathKit fan
Warner Robins GA EM82fp



----- Original Message -----
From: "Mike Hardie" <hardiem at INTERGATE.CA>
Sent: Friday, November 10, 2000 8:00 PM
Subject: Two Questions - HP-23A and HW-101


> 1) Does anyone know of a substitute circuit breaker for the one found in
the
> HP-23A power supply? (Or the current value of the original?)
>
> 2) The HW-101 voltage regulator tube seems to almost go completely dark
when
> transmitting cw, which it didn't do a while ago.  Has anyone else had this
> happen?
>
> Mike at: hardiem at intergate.ca
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"