Fw: SB104A Help

[Talen]

PA sounds OK, what you need to tune are the slugs on the
HFO "D" board and set them as indicated in the manual.
Also check out the SB-104 repair web site at
http://www.inetport.com/~talen/sb104.html    that's what it's
there for.

73s  Kees K5BCQ

----- Original Message -----
From: "John Hutchins" <WB4NNY at arrl.net>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, November 21, 2000 7:51 PM
Subject: SB104A Help


Hi Greenies!
I have a SB104A with the following symptons in hi power position.
power output:
80 mtr aprox 1watt
40 mtr aprox 5 watts
20 meters approx 5 watts
15 meters 65 watts
10 meters 50 watts.
I read the .65 volts on the test points on the pa board that says it
should be good.
I have the operating manual, but no construction manual.
Does someone have a suggestion as to where I should start?
Thanks in advance,
John WB4NNY

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"