sb-101 trip

[Justin L Hall]

Same as my HW-101.
Is it the neutralization?
How do you fix that?
Justin


Newly acquired SB-101 is a great receiver.  Once rig has warmed up and I
begin transmitting (PTT) I only hear 1 or 2 seconds of audio after
releasing
PTT and the rig trips back into XMIT.  VOX is OFF and PTT switch, etc. is
OK
(even removing microphone connector from rig has no effect).  Cleaned and
examined both relays and tested/replaced tubes in VOX circuits.  Once
this
begins to happen, only solution is to power down (for ~10 secs).  When
power
back up, stays in RCV until next transmit.

Anyone have this problem?  Ideas?  Thanks!

- Stu KB1QW (Phila., PA)
[long time reader, first time "poster" on this reflector]

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"