SB-600 Speaker help needed

[Joseph Allis]

When my speaker went bad in my sb600 I used a Radio Shack 40-1265 and the
fit was tight, but the mounting holes lined up and I didn't have to do any
cutting or bending.
Joe
----- Original Message -----
From: "Doug Shields" <w4das at ADELPHIA.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, April 17, 2001 9:50 PM
Subject: SB-600 Speaker help needed


> Hello all,
>    I have several SB-600 speakers that need help.  I need one replacement
> 6x9 speaker that will actually fit in the Heathkit SB-600 cabinet.  I have
> considered cutting the metal frame on a Radio Shack speaker but I would
> prefer to find one that does not require this.  I also have several
original
> Heathkit (#401-108) speakers that need to be reconed.  I have seen
> information on at least one place that does this but I can't find it now
> that I need it.  Any help would be greatly appreciated.  Thanks very much.
>
> Doug  W4DAS
>
> PS. Is anyone driving to Dayton from Florida that would like to split the
> driving/gas?
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"