PEC's

[Stephen M Smith]

Ray and group,

The # on the PEC in my -101 is 84-22.

73.......Steve 'The Scrounger' Smith
             WB6TNL Oxnard, CA   USA
                            "snort rosin"

On Thu, 2 Aug 2001 16:29:56 -0400 Ray Allen <w2kbr at BAYSERVE.NET> writes:
> Hi Stu and the Group:
>         That's interesting, cause the values I supplied come from
> the SB-110A.
> And the number imprinted on the Sprague PEC is 84-22.
>
> I wonder what the number is on the SB-101 PEC.  Just for drill on
> the
> SB110A, the PEC pins are as follows: pin1 goes to the plate of the
> mic
> amp/cw osc tube, pin 2 goes to ground, pin3 to the grid of the abv
> tube,
> thru coupling cap .01, RFC, with 500uuf and 1meg at the grid going
> to
> gnd.
>
> Ray
> --
> *****************************
> Ray A. Allen, Sr., W2KBR
> 8303 Grainfield Rd.,
> Severn, Maryland, 21144-2331
> *****************************
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://www.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://www.tempe.gov/archives/HEATH.html