No subject

[ejforwood Jerold Forwood]

Hi All,
Sorry, I know this question has been answered before but it has only now become a problem for me.
1) Which is best final for a SB-401, 6146, 6146-A, 6146-B, or 6146-W and is it necessary to use a matched pair?
2) I have good drive from the SB-301 I am using in a transceiver pair but am getting low RF voltage on pin 2 of the 6CL6 and very low on the wire between pins #5 on the 6146's of which one is a 6146 and one is a 6146-B.
Thanks in advance for your advise.
Jerry, K0EJF
E. Jerold (Jerry) FORWOOD

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html