SB dial vernier

[Ken Ketner]

Does anyone have a fix for a no longer clutching zero vernier wheel on
the SB series Heaths? This is the dial zero line, the position of which
is changeable to zero beat the set using the calibrator. My wheel, with
the two little gripper disks, no longer mates with the piece of plastic
on which the mark is located. Looks like the top of this piece of
plastic holding the mark has rubbed off, thus shortening the edge that
would normally have been long enuf to mate with the little wheel. Looks
like a real tangle in there.
--

Ken Ketner
ARS KA5ELD
                Personal Webpage: http://www.wyttynys.net
                Office Webpage: http://www.pragmaticism.net
Email:
        home:   ketner at arisbeassociates.com
        office: b9oky at ttacs.ttu.edu

US MAIL
PO Box 65135
Lubbock, TX 79464

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"