HW-101 Meter

[Eddy Swynar]

Mike...

The entire plastic face should just "pop" off---hold the back body of it
with one hand, & pull the front face upwards, from one of the ends, with the
other.

It's probably never been dis-assembled before, so expect some resistance!
When done, just snap it back on...

Good luck!

~73~ Eddy VE3CUI - VE3XZ






----- Original Message -----
From: "Mike Hardie" <hardiem at INTERGATE.CA>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Saturday, February 17, 2001 8:31 AM
Subject: HW-101 Meter


> Can anyone tell me how to take apart an HW-101 panel meter?  I've got one
> that's jammed, suspect grit between magnet and coil, and can't see how to
> get into meter.
>
> Mike VE7MMH
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"