Heath filters

[Multi-Volti Devices]

Some Heath IF's were 3395 kHz, but later (i.e. HW-5400) were in the 8+ MHz
range. The SB-1400 was also in the 8-ish MHz range, but different than the
'5400 (being a Yaesu design, it used Yaesu filters).

Murray

----- Original Message -----
From: Marty Wb2Fou <Wb2fou at AOL.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Wednesday, February 28, 2001 9:40 PM
Subject: filters


> did you guys know that the heath filters are the same freq. as those used
in
> kenwoods . so I think you can use a kenwood in heath . just that the size
is
> smaller .
>
>        Marty
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"