tube glue?

[Eddy Swynar]

Ken, I've had the best of luck with so-called "Krazy Glue", or, "Super
Glue"...

You simply apply it along the perimeter of the base, right where it meets
the bottom of the envelope---but not too much!

Gently squeeze the applicator holding the glue, as you rotate the tube. The
glue will actually "wick" its way through the "joint" of the glass/base,
creating a quick, permanent, invisible bond. Works absolutely great! (any
excess should be wiped off the surface of the base/envelope with a clean,
soft cloth).

...And yes, it's impervious to the heat generated by the tube when it's in
operation.

Try it! I know you'll be extremely pleased.

~73~ Eddy VE3CUI - VE3XZ



----- Original Message -----
From: "Ken" <wn2sqc at JUNO.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, January 02, 2001 8:08 PM
Subject: tube glue?


> Hi List Members. Can anyone recommend what type of glue should be used to
> repair a tube where the glass bottle has loosened from the base? Thanks in
> advance, 73's Ken
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"