SB-Series Dial Part(s)...

[Eddy Swynar]

Hello Fellow "...Heathniks"...

Any chance somebody reading this might have a decent dial diver for the SB-series for sale...? 

I'm referring, of course, to the little bushing/flanged gizmo that goes through the escutcheon, & seats atop the inside of the dial, turning it and the LMO shaft by the large knob...

The two flanged "wheels" in the driver of my SB-301 have spread to the point that tuning the thing is inconsisent, i.e. there are "flat spots", if you will, turning the knob (i.e. the knob spins, but the dial doesn't always track with it).

I was thinking of attaching a small, self-adhesive (on one side) rubber "washer" to the inside of at least one of the copper-coloured flanges, to see if that might alleviate the situation---anyone ever try that fix? (the bushing is shoved down now as far as it'll go).

Thanks...

~73~ Eddy VE3CUI - VE3XZ

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"