SB-Series Dial Part(s)...

[Chuck W4MIL]

In a message dated 1/20/01 7:40:28 AM Eastern Standard Time,
gswynar at DURHAM.NET writes:

> I was thinking of attaching a small, self-adhesive (on one side) rubber "
> washer" to the inside of at least one of the copper-coloured flanges, to
see
> if that might alleviate the situation---anyone ever try that fix? (the
> bushing is shoved down now as far as it'll go).
>
>  Thanks...
>
>  ~73~ Eddy VE3CUI - VE3XZ
>


Eddy,

Had a very similar problem with my 301 and made a temporary fix by using a
small diameter "O" ring.  Worked ok until I found a replacement drive
mechanism.
Its possible a couple of the elastic bands used by dentists on "retainers"
could be used.  Hope this helps.

73 de W4MIL
Chuck

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"