VP-1-6 info needed

[Ken Bakhaus]

If this the vibrator PS that was also used by the sixer/twoer etc., it had a
tube for the rectifier - something like a 12x4. The PS was about 4 inches
square by 1 inch thick with a tube, transformer and vibrator mounted on one
surface. I sold mine last year so don't have all the scoop.

kcb
----- Original Message -----
From: Chuck Penson <wa7zze at JUNO.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Saturday, January 27, 2001 7:09 PM
Subject: VP-1-6 info needed


> Gang,
>
> Here is a rare one.  I need some info on the VP-1-6 mobile power supply.
> This was used to operted the CB-1, et al, from 6 or 12 volt DC. Question:
> Did it use a tube? Or was it solid-state?
>
> Can you tell I am busy writing : )
>
> Thanks!
>
> Chuck / WA7ZZE
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"