Heathkit foot extenders

[Bob Nickels]

>     I have been considering making a quantity of the black plastic foot
> extenders used on the SB series and many other Heathkit items

Before going to the expense of making these from scratch, I thought it might
be worth
reposting my message of Jan 13:

----------------------------------------------------------------------------
--------------------------------------------------------------

Like many of you, I had many Heath SB-series cabinets with missing cabinet
feet and/or risers.  Thanks to a tip from Rob WA9ZTY, I obtained new
replacement feet and risers at reasonable cost from  Product Components
Corporation.  If you want to take a look, here is the combination of K20002
foot (7/16" tall) and K20004 (3/4" tall) riser:
http://users.mwci.net/~ranickel/foot.JPG

The following quote I received from PCC indicates that the K20004 riser will
soon be obsolete.  That's why I also ordered some K20003 feet  which are
9/16" tall and can be combined with the K20002 to obtain almost the same
appearance, or used alone for rear feet.

I received excellent service for my e-mailed order to Mary Pruter at
productcomponents at att.net -  contact information is shown below.   They do
accept credit card orders and have a very nominal $15 minimum order
requirement.  Looks like a perfect match for Heath and National gear.   PCCs
website is at http://www.product-components.com/

73, Bob W9RAN

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"