SB 104

[JERRY JUDY]

I have gone through all the pins on the different circuit boards on the
radio and cleaned all the rca plugs that inter the alc board to the final.
sprayed all controls and bingo
the SB 104 is working very well. The meter circuit is functioning properly
and with the mic drive set at the 3:oclock position the rig is putting out
100 watts on the
scope. Thanks to all for your suggestions. I did find one leg of a
transistor that was not soldered. Thanks to all.

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"