Heath filters: InRad still has em

[Carl Hyde]

International Radio still makes filters for the Heathkit radios in many
different bandwidths. I just put one of their AM filters in my old faithful
SB-301. You can see their selection at:

http://www.qth.com/INRAD/contact.htm


--- Multi-Volti Devices <multi-volti at SOFTHOUSE.COM> wrote:
> Some Heath IF's were 3395 kHz, but later (i.e. HW-5400) were in the 8+ MHz
> range. The SB-1400 was also in the 8-ish MHz range, but different than the
> '5400 (being a Yaesu design, it used Yaesu filters).
>
> Murray
>
> ----- Original Message -----
> From: Marty Wb2Fou <Wb2fou at AOL.COM>
> To: <HEATH at LISTSERV.TEMPE.GOV>
> Sent: Wednesday, February 28, 2001 9:40 PM
> Subject: filters
>
>
> > did you guys know that the heath filters are the same freq. as those used
> in
> > kenwoods . so I think you can use a kenwood in heath . just that the size
> is
> > smaller .
> >
> >        Marty
> >
> > Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
> 'name' 'call'"
> > Listserver Submissions: heath at listserv.tempe.gov
> > Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
> >
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name'
> 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"


=====
Carl H.
Remember, the opposite of PROGRESS is CONGRESS

__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"