Shaft coupling

[Stewart D. Lyon]

----- Original Message -----
From: "Martin Tippin" <w0akg at TRI-LAKES.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Wednesday, March 28, 2001 5:21 PM
Subject: 101


Looking for the  Final Tune shaft Coupling- Fibre I think, thanks
Martin  L Tippin   W0AKG
140 Monarch Lane
Branson, Mo 65616

Martin
They're usually plexiglas.

You can get all the parts to make up one from Home Depot or Orchard Supply.
In the nut, bolts, screws section, look for nylon spacers (usually in a
drawer). You should find one 1" long, 1/2" OD, .259 ID. Drill & tap for a
6/32 set screw 1/8" in from each end. I usually install 2 screws on each
end -- 90 deg apart. There you have it -- a shaft coupling that's about 1/8"
shorter than the original.

Stu, W6CUX

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"