HP-23 recap

[Charles W. Morehouse]

THATS FINE, HOW ARE YOU GOING TO MOUNT THEM?
Wayne;
W4GBW

Glen Zook wrote:

> NO, I DIDN'T MAKE A MISTAKE!
>
> Check page 273 of Catalog 607 from Mouser.
>
> You will see that part number 5985-85-450V120 IS a 450
> volt 120 mfd capacitor.  Mouser puts the voltage and
> the value of any capacitor that they sell at the end
> of the part number.  In this case the 450V120
> indicates a voltage rating of 450 volts and a capacity
> value of 120 mfd.
>
> These work fine in the HP-23.
>
> Glen, K9STH
>
> --- "Charles W. Morehouse" <w4gbw at brevard.net> wrote:
> > Glenn,
> > You made a slight error. The pc board mount you
> > mentioned is actually  a
> > 180uf@ 250 vdc. At 450 vdc there is only 100 and
> > 150uf. The cap I mentioned
> > is the closest that Mouser has and they work fine.
> > Just the cost. 73.
>
> __________________________________________________
> Do You Yahoo!?
> Find a job, post your resume.
> http://careers.yahoo.com

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html