Query

[Ed Richards]

Bill;

Heathkit revised their procedure for neutralization. You're right. It was
tedious and didn't work. The new procedure is to disconnect the B+ to the
finals plates and screens and stick a RF probe in the antenna jack and
tune for minimum on the meter. Good luck.

Ed

On Fri, 23 Nov 2001 09:52:23 -0500 Bill Ramsey <ka8wtk at RAEX.COM> writes:
> Ray,
>   One of my manuals (HW-101) had a procedure where you adjusted the
> neut. cap until maximum output and lowest plate current occurred at
> the same setting of the plate tuning control. It is a tedious and
> from my experience not very good. Never could get it right that way.
>
>             Bill
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html