SB401 SSB OK, CW lowwww????

[mike bryce]

dave...

could be that the bandpass of the cw carrier oscillator is off enough that
very little is making it though the filter. I'd check the oscillator to make
sure the crystal is on frequency.

Mike Bryce WB8VGE
SunLight Energy Systems

http://www.seslogic.com
http://www.theheathkitshop.com

"Electricity at the speed of light"

> From: Dave Edwards <ham at CYBERCOMM.NET>
> Reply-To: Dave Edwards <ham at CYBERCOMM.NET>
> Date: Sat, 24 Nov 2001 19:53:34 -0500
> To: HEATH at LISTSERV.TEMPE.GOV
> Subject: SB401 SSB OK, CW lowwww????
>
> Any thoughts on why transmitter would work just fine on USB or LSB, but have
> low drive, and therefore output (10 watts) on CW???
> Thanks all!!
> PS.. cw level turned up
> ....Dave
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html