IM-25 VOM Battery

[Charles W. Morehouse]

Hi Mark,
Mercury cells are no longer made tx to the EPA. Replaced mine with an N type
cell and holder. Stuck the holder down with silicone glue. Recal and it will
work fine. Luck and 73's.
Wayne;
W4GBW

Ed Richards wrote:

> No, but I replace them with an alkaline AA cell (1.5 volt). Works good.
>
> Ed
>
> On Sun, 25 Nov 2001 12:51:23 -0500 Mark Johnson/Ontario/IBM
> <mjohnson at CA.IBM.COM> writes:
> > Hello All;
> > Trying to bring back to life  an IM-25 Solid State VOM. For the
> > Ohmmeter
> > section, it requires a Mercury Cell...NEDA 1100 or Everyready E1N.
> > Its a
> > 1.35vdc cell.
> > Any one know where I might obtain such a beastie???
> >
> > Thanks!!
> >
> > Mark V. Johnson
> > VE3DJU/VE3DDI
> >
> > -----------------------------------------------------------
> > This list is a public service of the City of Tempe, Arizona
> > -----------------------------------------------------------
> >
> > Subscription control -
> > http://www.tempe.gov/lists/control.asp?list=HEATH
> > To post - HEATH at LISTSERV.TEMPE.GOV
> > Archives - http://interactive.tempe.gov/archives/HEATH.html
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html