11 Pin Connector:

[Harold Hairston]

I don't know if a made-up 11 wire cable with all the correct wire gauges is
readily available or not. However, I have purchased the 11 wires of the proper
length and gauge, fed them through a suitable length of clear plastic tubing,
soldered the wires to the proper pins in the connectors and secured the tubing
and wires at each connector, using the provided clamp. This makes a beautiful
"Cable".

Harold

Gene Sailsbury wrote:

> Hello:
> Where can I get the cable to make up a power cable for my HW-32A and HW-12A?
> I would like it about 6-8 feet long.  Also am looking for a HW-22A to round
> out my collection of mono banders.  I want to use them mobil
> and need information on the DC power supply.
> As you can tell I am very new with the HeathKit and have a lot to learn.
> Thanks for you help and please mail me at
> gsailsbury at mobil1.net
> 73
> Gene Sailsbury kc0iky
> Pittsburg, Ks 66762
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html