Is the transmitter

[Larry Bratcher]

Realign using a properly terminated 50 ohm non-reactive dummy load.  NOTE: This does not
       include a light bulb.
21.  Check for normal Het. Osc. test-point voltage.
22.  Check for proper LMO injection voltage 1.0-1.5 VRF.
23.  Check for a high AC ripple content in the LV-B+, HV-B+ and bias voltages from the power supply.

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html