SB-401 Question

[Ed Richards]

When working TRANSCEIVE with one of the receivers (I forget which one)
you are instructed to remove it. Look up the interconnect connections for
transceive. Seems there is a resistor change too, around the
LEVEL/FREQUENCY CONTROL.

Ed Richards

On Thu, 18 Oct 2001 10:29:39 -0400 Ed Goss <meg at APLCOMM.JHUAPL.EDU>
writes:
> Hello,
>      Can anyone familiar with the SB-401 transmitter remind me why
> some rigs have the 21 mHz trap installed, and some don't?  I've
> been through the manual several times and it appears that all 401
> transmitters should have this part installed.  Perhaps it's only
> needed if you intend to work transceive?
> --Ed, N3CW--
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html