SB dial set pulley

[Eddy Swynar]

Hi Mark...

Those things CAN be soldered back onto the "shaft", of course, assuming your
buddy hasn't lost the disk...

I once had one that was literally "spinning its wheels"---the disk was on
the shaft OK, it just wasn't secured to it properly (i.e. the shaft would
turn, the disk wouldn't).

A minor touch-up with the soldering iron & solder fixed that up post
haste...

~73~ Eddy VE3CUI - VE3XZ











----- Original Message -----
From: "Mark Graalman WB8JKR" <wb8jkr at JUNO.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Saturday, April 27, 2002 11:37 AM
Subject: SB dial set pulley


>   Would anyone happen to have a dial set shaft/pulley
> assembly for the SB series? I have a friend who had
> the rear disk come off of his.
>
> Thanks,
>
> Mark  WB8JKR
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html