hw 101

[Edwin J Forwood]

Want an easier way?
The audio lead from the mic connector is a shielded cable, the Push to
talk one isn't and it's usually a yellow wire.
73's de Jerry, K0EJF

On Mon, 5 Aug 2002 07:02:05 -0400 john <johnmb at NC.RR.COM> writes:
> You'll enjoy the 101...
> To find the pinout, take a small cliplead and clip one end to a
> bare screwhead on the rig, and touch the other end to one of the
> 2 connector pins. One will do nothing (that's the audio in)...the
> other
> will key the rig (that's the PTT lead) . Make sure you have a dummy
> load
> connected!
> Congrats on a neat rig!
> 73
> John
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html