HW-101 (and other) Lever Knobs (462-218).

[Ed Richards]

Bob et al;

Be advised there are two types. One has a round hole and a set-screw, the
other has two opposing notches to engage slots on the shaft. Which are
you proposing?

73,

Ed Richards

On Sun, 24 Feb 2002 08:31:21 EST "Bob, WB2UJD" <BobbyTrip at AOL.COM>
writes:
> Hello,
>
> Anyone know of a source for these?  I am guessing I am not the only
> one who
> has a HW-101 (or SB-xxx etc...) that the lever has broken off of the
> rest of
> the knob.  I have looked into having these reproduced and after the
> initial
> mold cost they could be made for $10 a piece (maybe slightly more or
> less, I
> would negotiate based on the vanticipated volume).  Are there others
> out
> there who would want such a thing?  This would determine if paying
> for the
> mold to be made would be worthwhile ($20).  Thanks in advance for
> your input
> (or a suitable alternative that I have yet to find!).
>
> Bob, WB2UJD
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html