Kenwood TS80s + SB200

[Dave Edwards]

Check that the relay contacts on the 820 are making a solid closed
connection when you transmit.
They may not be heavy duty enough to handle the current of the SB200. It was
not a problem for the HW101, but that used a big Potter & Brumfield relay.
The 820 may use small PC type relay (not sure)
....Dave
----- Original Message -----
From: Andrew Schneider <schneiderandrew at YAHOO.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Monday, January 07, 2002 3:37 PM
Subject: Kenwood TS80s + SB200


> I need some help getting my TS 820s to drive the SB200.
>
> As some of you may know the SB 200 works great with my HW 101 but the TS
> 820s will not trigger the relay of the SB 200.
>
> I am also a HAM that has not been on HF in 20 years.
>
> Sorry for the basic question but any and all advice would be appreciated.
>
> Andy Schneider
> N7EBG
> www.wmsinc.org
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html