HW-101 VFO Problem

The Heathkit Junkie w0qni at JUNO.COM
Sun Jan 13 15:01:35 EST 2002


Carl:

The problem with your LMO (jumps) is also a problem with all SB-100-1-2
and the HW-100-101.

The rotor part of the LMO is not making good contact. You need to take
apart the LMO and use a small amount of "Conductive Grease" usually with
an anti-oxidant, on the bearing surface. Depending on who made the LMO,
some have that bearing exposed under a nut on the back side of the LMO.
On other units, you may have to have double jointed fingers. If that does
not work, use about a 14 gage wire, stick it into the grease and go for
it.

You can find this "grease" at most computer stores.

Best of luck
    (o)  (o)
00ooo---ooo00
      ~~~~~~
73 - BILL - WØQNI
"THE HEATHKIT JUNKIE"

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html




More information about the Heath mailing list