[Heathkit] Help HW-101

[Mark Graalman WB8JKR]

 For the S meter check the value of R106, R107.
For the distortion problem change R123 from 470 ohm to
100 ohm, change C17 from 12 pf to 100 pf, change R113
from 1K ohm to 10K ohm, change C119 from 500 pf to
.001 ufd, change C306 from .005 ufd to .01 ufd.

73,  Mark  WB8JKR


On Fri, 5 Jul 2002 11:35:22 EDT HeathlinerSB at aol.com writes:
>  Hello List!
> Got a cheap HW-101 on a flea market.
> Made a realignment but have still a problem. It is not possible to
> get
> S-meter 0.
> Even with the variable resistor for S-meter 0 fully adjustet,
> S-meter is far
> left.Also audio in RX-mode sounds a bit "rough".
> Could not check audio in TX-mode, because in TX there are around
> mic-input
> several "modifications" that i have to rebuild. But that is another
> story. CW
> is full output all bands.
> Any idea about the S-meter 0 ?
> Best of luck with the green equipment.
> Randolf, DL6KAI
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html