SB-650 question

[Mark Graalman WB8JKR]

  Can anyone give me information on using the
SB-650 display with the 301/401 setup?
 If the SB301/401 is set up for transceive operation
do you use a RCA "Y" connector on the BFO, LMO,
and HFO lines? If so, am I correct in assuming that
one would have to align the BFO output coil, and the
HFO coils in the 301 with everything hooked up since
I would think the additional lines to feed the signals
to the 650 display would cause additional loading to
the HFO, BFO, LMO outputs of the 301.

Mark  WB8JKR

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html