SB-303

Rob Frans robertfrans at ATTBI.COM
Mon Jun 24 18:46:21 EDT 2002


Ron... this is exactly what it was!!! Both of the main boards looked fine,
but, had worked loose in transit and had become unseated with the
connectors.  Physically, they looked perfect... Seating them did the
trick... The SB-303 is up and running...

(I want to thank everyone on the listserve that responded to my request for
help!  Also, anyone out there that has this problem in the future... good
solution to know!)

Thanks again Ron, and to all!

Rob
K8RAF
  -----Original Message-----
  From: ronaldoxley [mailto:ronaldoxley at msn.com]
  Sent: Monday, June 24, 2002 11:09 AM
  To: Rob Frans
  Subject: Re: SB-303


  A common problem is that the 2 large circuit boards become unplugged.
Remove the cabinet and check to make sure all boards are properly seated.

  73,
  Ron, WM8Z

    ----- Original Message -----
    From: Rob Frans
    To: hamtech at rtoham.com
    Sent: Saturday, June 22, 2002 12:28 PM
    Subject: SB-303


    Hi Ron... just left you a quick message on your phone, but couldn't
finish...

    Anyway, could you shoot me a quick note with perhaps some possible
things I could check on my SB-303 rcvr??

    Pilot lights light, no audio or meter reading... "behaves" as if it were
in standby mode regardless of settings.
    I don't have the manual and can't look at the trouble shooting guide for
this characteristic, so I thought I would
    ask before needing to send it to you... I'm hoping something pretty
simple to check...

    Thanks for your help, hope all is well with you!  Rob

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html




More information about the Heath mailing list